Poster Pitches

Day 1 Poster Pitches - Tuesday 3rd September - 09:55 to 10:20 - England Suite
Number Presenting Organisation Title
1 Aida Nasiri Nanocyl S.A Emergence of NC7000TM Carbon Nanotube into Rubber products,  Case studies and review of regulatory environment
2 Zehan Yousaf University of Manchester Mechanical response of particle-reinforced polyurethane rubber under various loading conditions
3 Akash Trivedi University of Oxford Predicting the High Rate Mechanical Response of (Un)filled Natural Rubber
4 Maria del Mar Vizcaino Vergara & Leif Kari KTH Royal Institute of Technology & Queen Mary University of London On the modelling of physical ageing: a new free volume evolution for filled reinforced rubber
5 Mariia Viktorova Bergische Universität Wuppertal A coarse grained model for the simulation of dynamic properties of filled elastomers
6 Hiroshi Morita AIST, CD-FMat Analysis of the polymer chains in the expansion process of thermo plastic elastomer using coarse-grained simulation
7 Hok Him Chan University of Strathclyde A comparison of modelling methods for tear fracture propagation in rubber
       
9 Hiroaki Ono Research Center for Hydrogen Industrial Use and Storage(HYDROGENIUS), Kyushu University Influence of the decompression process on the internal damage evolution in the transparent EPDM through the high-pressure hydrogen exposure cycling
10 Jacopo Schieppati Polymer Competence Center Leoben GmbH Temperature impact on the fatigue crack growth behavior of rubbers
11 Nobuhiko Fujii Denka Company Limited Introduction of New Oil-Resistant Elastomer “Evolmer®”
12 Irina Zlobina Interconnect Management Corporation JSC Development of SIBUR SSBR for Tires
13 Keisuke Yagi AGC Chemicals Europe New developments in AFLAS® FEPM
14 Akansha Rathi University of Twente Predicting the performance of S-SBR / BR based Tire Tread Compounds
15 Eduardo Yanes Queen Mary University of London Viscoelastic effects on the frictional behaviour of elastomers used in O-ring type seals
Day 2 Poster Pitches - Wednesday 4th September 08:50 to 09:25 - England Suite
Number Presenting  Organisation Title
1 Quentin Tévenot Nagaoka University of Technology Graft copolymerization of styrene monomer through ATRP-ARGET onto a modified natural rubber latex
2 Stefanie Haupt Technische Universität Bergakademie Freiberg Process parameter influence on demoulding force
3 Irfan Shahzad Hochschule Merseburg Synthetical modification of glycerol formal ester of soybean oil (bio oil 1) to reduce migration from NBR rubber and its effects on the mechanical properties
4 Mi Hyun Sohn  & Ur Ryong Cho Koreatech University Study on Synthesis and Mechanical Properties  of Bio-polyurethanes
5 James Boden University of Bath Understanding the self-healing ability of Epoxidised Natural Rubber
6 Hannah Szczepanowska Heritage Conservation Centre Gutta percha, natural rubber and balata, molecular vibration that changed the course of history
7 Jieun Lee Korea Institute of Footwear and Leather Technology (KIFLT), Busan National University Comparison of Dynamic Viscoelastic Properties of Foam According to Blend Ratio
8 Drahomir Cadek University of Chemistry and Technology Prague The influence of water on accelerated vulcanization
9 Ranvir Singh Virdi Robinson Brothers Limited A predictive model, using n-nitrosamine toxicological data, for the design of safer rubber accelerators
10 Murat Sen Hacettepe University Effect of Lignin on The Network Structure of NBR Elastomers: Identification of Poly, Di and Mono-Sulfidic Crosslink Formations
11 Davut Aksut Hacettepe University Effect of Radiation on Mechanical Properties of Peroxide and Platinum cured phenyl-vinyl-methyl-polysiloxane (PVMQ) Elastomers
12 Isabelle Nogha ELKEM Silicone elastomers for control of vibration: new concepts for enhanced fatigue behavior
13 Xiabin Liang Tokyo Institute of Technology A Study of  Mullins Effect for Carbon Black Filled Styrene Butadiene Rubber by Atomic Force Microscope Nanomechanics
14 Marzieh Salehi University of Twente A new method to rapidly predict tyre grip in a laboratory environment
15 Rodrigo Navarro Crespo Institute of Polymer Science and Technology Thermo-reversible supramolecular polyrethanes based on PCL with self-healing behaviour

Posters

 

Presenter Poster Title
1

Muhammet Iz

Effect of End-Functionalized Solution Styrene-Butadiene Rubber on the Silica-Filled Compounds in Different Silica-Silane Systems
* 2

Davut Askut

Effect of Radiation on Mechanical Properties of Peroxide and Platinum cured phenyl-vinyl-methyl-polysiloxane (PVMQ) Elastomers

3

Murat Sen

Effect of Lignin on The Network Structure of NBR Elastomers: Identification of Poly, Di and Mono-Sulfidic Crosslink Formations

4

Martin Bellander

Oil resistance testing of seals in heavy vehicles
* 5 James Boden

Understanding the self-healing ability of Epoxidised Natural Rubber

6

Drahomír Čadek

The influence of water on accelerated vulcanization

* 7

Hok Him Chan

A comparison of modelling methods for tear fracture propagation in rubber

8

Huanming Chen

Investigation of A Thermoreversible Superamolecular Polyurethane on Recovery Responses and Strain Rates Dependence

* 9

Stephen Connolly

Inhomogeneous parameter identification methods for rubber hyperelasticity

10

Nobuhiko Fujii

Introduction of New Oil-Resistant Elastomer “Evolmer®”

 11

Yangyang Gao

Increasing the thermal conductivity of polymer nanocomposites filled with carbon nanotubes via molecular dynamics simulation

 12

Donghun Han

Studies of normal pressure foaming use to rubber polymer

 13

Donghun Han

Analysis of the recovery rate pattern according to the application of the thermoplastic resin

 14

Young-Min Kim

Effects of Acrylonitrile Content on the Mechanical, Micro Structural, and Low-Temperature Properties of Acrylonitrile-Butadiene Rubber.

* 15

Stefanie Haupt

Process parameter influence on demoulding force

* 16

Kiwon Hwang

Effect of residual surfactant on the physical properties and crosslink densities of silica filled and carbon black filled ESBR compounds 

 17

Makiko Ito

AFM nanomecanics on rubber composites reinforced by fibrous filler under uniaxial stretch

 18

Wisut Kaewsakul

Compensating extra sulfur to TESPD-silica-filled NR compounds

19 

Bagdagul Karaafac

Evaluating Vulcanization Systems for Natural Rubber/Epoxidized Natural Rubber Based Compounds

20 

Bagdagul Karaafac

Low Temperature Silane Vulcanization of Chloroprene Rubber (CR)/Chlorinated Polyethylene (CPE) Compounds

* 21 

Hitoshi Kawai

Investigation on a new factor in vulcanization reaction using Sulfur K-edge NEXAFS

* 22 

Iljin Kim

Influence of Functional Group of Silane agents on Surface Modification of Silica and Physical Properties of the Solution Styrene-Butadiene Rubber/Silica Compounds

* 23 

Andrea Kvasničáková

Magnetic composites able to absorb electromagnetic smog

24 

Jieun Lee

Comparison of Dynamic Viscoelastic Properties of Foam According to Blend Ratio

25 

Xiaobin Liang

A Study of Mullins Effect for Carbon Black Filled Styrene Butadiene Rubber by Atomic Force Microscope Nanomechanics

26 

David Lowe

New materials and methods for additive manufacturing of rubber components

* 27 

Kosuke Miyaji

Characterization of Network Domains in the Rubber Matrix by Scanning Transmission X-ray Microscopy

28 

Hiroshi Morita

Analysis of the polymer chains in the expansion process of thermo plastic elastomer using coarse-grained simulation

29  Asrul Mustafa

Potential Utilisation of Specialty Natural Rubber Latex Paint for the Inhibition of Shipworm Teredo navalis Attack on Wood Substrate

30 

Aida Nasiri

Emergence of NC7000TM Carbon Nanotube into Rubber products, Case studies and review of regulatory environment

31 

Rodrigo Navarro Crespo

Thermo-reversible supramolecular polyrethanes based on PCL with self-healing behaviour

32 

Isabelle Nogha

Silicone elastomers for control of vibration: new concepts for enhanced fatigue behavior

* 33 

Kornkanok Noulta

Investigation of the effect of crosslink density on mechanical properties of natural rubber using new combining curatives in sulphur cure system

34 

Hiroaki Ono

Influence of the decompression process on the internal damage evolution in the transparent EPDM through the high-pressure hydrogen exposure cycling

35 

Joon Chul Park

Development of Hood seal using low hardness TPEE(Thermoplastic Polyether Ester Elastomer)

* 36 

Bianca Prem

Influence of the blend ratio in elastomer-thermoplastics blends on the mechanical properties

37

Akansha Rathi

Predicting the performance of S-SBR / BR based Tire Tread Compounds

38 

Afina Rumiantseva

Sibur elastomers for tires: development strategy

39

Annette Rüppel

The Adhesion of LSR and different Polypropylene-Types after Storage Tests

* 40 

Marzieh Salehi

A new method to rapidly predict tyre grip in a laboratory environment

41 

Mark Brooks

Reducing the environmental concerns of Zinc Oxide

42 

Shin Sato

Potential of wood rotting basidiomycetes for recycle of vulcanized rubber products

* 43 

Jacopo Schieppati

Temperature impact on the fatigue crack growth behavior of rubbers

44 

Ralf Schlegel

Blends of multigraft copolymers having high and low number of branch points

* 45 

Irfan Shahzad

Synthetical modification of glycerol formal ester of soybean oil (bio oil 1) to reduce migration from NBR rubber and its effects on the mechanical properties

* 46 

Kensuke Shirode

Degradation analysis of sulfur crosslink structure using S K-edge NEXAFS

47 

Adrien Simon

Incorporation of fillers in elastomeric composites: impact of the process on the thermomechanical properties

* 48 

Mi Hyun Sohn & Ur Ryong Cho

Study on Synthesis and Mechanical Properties of Bio-polyurethanes

49 

Chris Stevens

Cure Rate Measurement of Highly Reactive Rubber to Metal Bonding Agents
50

Hannah Szczepanowska

Gutta percha, natural rubber and balata, molecular vibration that changed the course of history

* 51 

Quentin Tévenot

Graft copolymerization of styrene monomer through ATRP-ARGET onto a modified natural rubber latex

* 52 

Akash Trivedi

Predicting the High Rate Mechanical Response of (Un)filled Natural Rubber

* 53 

Mariia Viktorova

A coarse grained model for the simulation of dynamic properties of filled elastomers

54 

Ranvir Singh Virdi

A predictive model, using n-nitrosamine toxicological data, for the design of safer rubber accelerators

55

Rosa Vitiello & Riccardo Tesser

Reaction temperature influence on products distribution of bromobutyl rubber synthesis

* 56

Maria del Mar Vizcaino Vergara & Leif Kari

On the modelling of physical ageing: a new free volume evolution for filled reinforced rubber

* 57

Yuki Watanabe

Research for hierarchical structures in rubber by using anomalous small angle X-ray Scattering

58

Keisuke Yagi

New developments in AFLAS® FEPM

59

Shinya Yagi

Study on temperature dependent reaction of sulfenamide accelerator by means of sulfur K-edge NEXAFS

* 60

Eduardo Yanes

Viscoelastic effects on the frictional behaviour of elastomers used in O-ring type seals

* 61

Muhammad Umar Zulkefli

An appraisal of the linear viscoelastic behaviour of unfilled natural rubber

62

Irina Zlobina

Development of SIBUR SSBR for Tires

63 Nasim Amiralian

Dry Compounded Rubber Materials Reinforced With Cellulose Nanofibres

64

Zehan Yousaf

Mechanical response of particle-reinforced polyurethane rubber under various loading conditions

65

Robert Bradley

Carbon Black Recovered from used Vehicle Tyres used a Elastomer Reinforcement - Black Carbons that are Green

66

Bireswar Banerjee

Advances in Tyre Retreading

67

Göknil Çetinel

Development of epdm and butyl rubber based recipes according to the ec1935/2004 european regulation and comparison of physical properties

68

Mohsen Jelokhani

Effects of curing system and epdm-g-mah on curing kinetics, clay intercalation and static-dynamic mechanical properties of organoclay/sbr/epdm nanocomposite

69 Donghyuk Kim

Influence of the organosilane covering and coupling agents on the crosslink structures of SSBR/silica compounds

70

Ondrej Kratina

Effect of bis[3-(triethoxysilyl)propyl] tetrasulfide, polyethylene glycol and polypropylene glycol on the fatigue crack growth of cured silica-filled natural rubbe

71 Jonghwan Lee

Properties of TPU composition mixed with non-halogen flame retardant

72 Fanzhu Li

Thermo-mechanical coupling analysis of heat build-up and rolling resistance for solid rubber tire: numerical simulation and experimental verification

73

Floriano Pastore

Tannin for production of free ammonia and non-allergenic NR latex

74

Chandrasekaran Pillai

Devulcanized Tire Rubber as polymer modifier of asphalt

75

Christopher Smith

Simulation of Elastomers